300 - Quarter-Turn Stainless
The Rotork Gears Series ‘300’ quarter-turn gear operators are the first of their kind to use metal forming technology in their manufacture. This technology dramatically reduces manufacturing costs and allows the operator to be produced from stainless steel.
View Product
SPI Smart Position Indicator
The Smart Position Indicator is designed for use in chemical, petro-chemical, oil and gas industries, power plants and water supply.
Limit switches enclosed in a IECEx/ATEX certified protective enclosure provide an accurate and reliable Open/Close signal to the control room for multi-turn manual valves. Using 30+ years of proven technology, the new Smart Position Indicator mechanically displays the position of the valve for in-field notification and digitally signals its open/closed position.
View Product
W100 - Shaft Direction Changing
The W100 gearbox has been designed primarily to be used on AB and manual duty IW series gearboxes to change the input shaft direction by 90° for underground applications.
View Product
PARSONS PEEBLES GEARBOX'S
The W100 gearbox has been designed primarily to be used on AB and manual duty IW series gearboxes to change the input shaft direction by 90° for underground applications.
View Product
BOD Merc-Free Analysis Sensor
Innovative electronic pressure measuring system for BOD determinations using manometric technique.
Biological Oxygen Demand (BOD)
Biological Oxygen Demand is the amount of oxygen used by micro-organisms when they bio-degrade organic material in a water sample. It is used as an important measure of the degree of contamination in a supply. The conventional BOD system comprises 6 bottles and 6 mercury capillary tubes with a constant scale of up to 1000mg/L. This allows exact and error free readings of the BOD value to be read directly in mg/L or to be calculated by single multiplication.
Cyanide Meter
Cyanide is a pollutant that originates mostly from metallurgical and galvanic industrial plants and is extremely poisonous to the human nervous system. It is therefore imperative to monitor and control its level in potable water.
RING JOINT GASKET
The Ring Joint Gasket was initially developed for use in the petroleum industry, where high pressure/temperature applications necessitated the need for a high integrity seal. They are mainly used in the oil field on drilling and completion equipment. Ring Joint Gaskets are also commonly used on valves and pipework assemblies, along with some high integrity pressure vessel joints.
Novus Sealing Nigeria Limited Gasket Production
The facility has the capacity to produce high quality gasket of various sizes (small, medium & large) and styles. The gaskets are designed for low stress to high pressure and for low to high temperature application. The gaskets are produced to ASME B16.5, B16.20 flange standards or to any standard as may be requested by clients.
View Service
ClydeUnion Pumps Isoglide range
The ClydeUnion Pumps Isoglide range of horizontal long coupled or close coupled ISO 2858 standard pumps is an established end suction design range
CUP-FK - Multi-stage barrel radially split pump
MULTI-STAGE CENTRIFUGAL
CUP-FK, a radially split, barrel case, multistage diffuser pump designed for high pressure.....
GEVEKE PUMPS
MULTI-STAGE CENTRIFUGAL
CUP-FK, a radially split, barrel case, multistage diffuser pump designed for high pressure.....
FLOWDIRECT Offshore Submersible Pump
Flowdirect UK Ltd are a dedicated Submersible Pumps Supply and Service business. Our products have a great pedigree and heritage and are renowned for durability. We have an extensive range of hydraulic selections and motor sizes.
1750 Series pilot operated poppet valves
Midland-ACS range of 3/2 pilot operated poppet valves in Stainless Steel 316L for use on gases.
View Product
1750 Series pilot operated poppet valves
Midland-ACS range of 3/2 pilot solenoid operated poppet valves in Stainless Steel 316L for use on gases.
View Product
PETROLVALVES CONTROL BALL VALVES
PetrolValves is a leading manufacturer of valves for the oil and gas industry.
Formed in 1956, PetrolValves has grown to a company with sales, services and
manufacturing facilities throughout the world with direct presence in the United States, Norway, United Kingdom, Italy, Singapore and Australia.
View Product
INTRA AUTOMATION PILOT TUBE MEASUERMENT
Pressure sensors are classified as Differential Pressure sensors for flow measurement.
The measuring principle of the pitot tube utilizes the differences between the pressure ridge on the upstream side of a bluff body and the static pressure on its down stream side.
KELTON METER MANAGER
KELTON MeterManagerTM (formerly FM2PTM) is the product headline for a suite of flow measurement software applications. The flow measurement software applications presented in the KELTON MeterManager are delivered as a user friendly, effective and efficient Management of Measurement solution to the end user. Each application will individually benefit your core business and used together will provide an integrated solution for all your flow measurement software needs.
GAS METERING SYSTEM
Systems Whichever technology you prefer, whatever your budget and whatever the application, our engineers have the knowledge and experience to deliver high accuracy gas metering packages to suit your needs.
HYDRAULIC CONTROL SYSTEMS
Specialising in hydraulic, pneumatic and electrical control systems we have an expert team of multi-disciplined engineers to support clients with integrated solutions around the world. Trading in the Middle East as Alderley, our work ethos of technical excellence originates from a wealth of experience and global successes achieved from our United Kingdom facilities (SMS) in Great Yarmouth and Aberdeen.
DRILLHEAD WELLHEAD SYSTEM
The Cameron drill-through wellhead system maximizes efficiency by streamlining drilling operations. Well control is achieved with one BOP nipple-up, resulting in safer drilling activities and providing significant time savings that reduce rig costs. Mandrel hangers eliminate the need to set slips, rough cut, and final casing cut.
TMC COMPRESSORS
You will find TMC compressors for numerous applications onboard all kinds of offshore vessels. Our experience and know-how, together with our close collaboration with our customers around the world, has resulted in innovative solutions for the offshore industry.
Inventor
Do you need a rapid surface to subsea fluid transfer system for emergency response operations? Want to improve subsea fluid transfer efficiency for well intervention and pipeline commissioning campaigns?
Interventor™ is your solution.
HELIFUEL PUMP UNIT
The Pump Unit connects to the JET A-1 tanks and transfers the fuel to the Dispensing Unit.
The Pump Unit can be either electrical or pneumatic driven.
Our standard model Pump Units are designed to stand alone or to be incorporated on the Laydown Skid holding the JET A-1 Tanks.
TQ8000 1-8, 1-16 GAS DETECTION CONTROL PANEL
The TQ8000 is housed in an IP54 rated metal, wall mounted enclosure, with entry for field cabling through the bottom gland plate.
EGF-H Serie Gas Filter
EG-H model gas filters are the elements that seperates the dust particles carried by the gas or very small particles spread within the gas (for example: dust and rust), holds these and protects the burner, gas counter and adjustment devices which may possibly be damaged. Dust, woodchips, smut and other physical substances and dirt in the gas are held by the fiber.
High-pressure homogenizer Rannie 185Q
5-plunger homogenizer, equipped with a Mono-Block or a Three-Piece valve housing. Large selection of standard options as well as special options. Materials for plungers, packing's, pump valves, valve seats and seals are custom-selected for your application.
APV Gaulin Mono-Block
An integrated design of cylinders (3 or 5), pump valves, plunger lubrication and inlet/outlet in one block.
Access to plunger packings and pump valves through front and top caps.
Gasketed plate heat exchanger
The global applications for industrial heat exchangers calls for a wide and deep product range, putting great demand on the equipment. SPX FLOW's portfolio of APV ParaFlow is designed to match your needs, whether this is for very small flows, or the extra-large kind, up to 4500 m3/h.
MAGMIXER MBE SERIES
The new MBE Series Mixers by Lightnin offers great value. It comes with the same high-quality mixing performance and guarantees that you get with all of our mixers, at an affordable price.
We have added the NEW MBE Magnetic drive mixers to our existing MBI Series to extend our product range.
PLENTY SIDE MIXERS - FIXED ANGLE MIXER
Plenty Side Entry Mixers have helped to set the industry international
standard. They can outperform other mixers on the market simply by virtue of their technically advanced design, which includes a simple and easily maintainable design, as well as a high efficiency, true helical pitch one piece ‘cast’ impeller incorporating high blade area and forward rake which was developed by Plenty.
ROTARY VANE PUMP P2000 SERIES
The P2000 rotary pump is specifically designed for space constrained installations, or where a simpler belt-driven design is preferred. The P2000 rotary pump is available in two different designs:
• Inboard roller bearing configuration with single mechanical sealing for duties
involving lubricating liquids, such as Fuel Oils, Vegetable Oils, Lube Oils, and Additives.
• Inboard plain bearing configuration with gland packing for duties involving non
lubricating liquids, such as Molasses, Resins, and Polymers.
BACKFLUSH FILTERS
The element is manufactured from a perforated sheet with a mesh liner or from a single piece wedge wire.They clean automatically without interrupting the liquid flow using the pressure within the system.
Spring loaded heads rotate around the inside of the basket. Heads are connected to a hollow central backwash shaft with backwash valve. The backwash valve, once open to the atmosphere, creates a reversal of flow across the filter element.
combibloc centrifual pump
Centrifugal Pumps are the most common and well-established pumps on the market. They come in many different models and can transfer fluids with high efficiency over a wide range of flows and pressures. SPX FLOW Johnson Pump brand offers several series of centrifugal pumps, many of which comply with ISO, DIN and API standards.
angle basket strainers
This is the simplest of our product offering.
The contaminated flow enters the filter inlet and then passes through the filtration element flowing from in to out.
The filtration element collects the required level of contamination on the inside of the element.The clean flow exits via the outlet connection.
M-303 slab gate valves
The M&J Valve Model M-303 is an advanced fabricated body design slab gate valve manufactured and tested to API-6D. The fabricated body allows for a wide selection of material choices. The floating slab gate uses the natural force of line pressure to obtain a dynamically tight downstream seal in high-pressure differential applications. Low-pressure sealing is accomplished with coil springs that energize the seat pushing it against the gate.
GENERAL SERVICE CONTROL VALVES
The GS-General Service Valves continues Copes-Vulcan’s tradition of designing and manufacturing control valves that provide both exceptional service and great value. Representing significant refinement in design and performance for general service globe style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a competitive price. Copes-Vulcan General Service Valves are ideally suited for non-severe flow control of most liquids, steam and gases. They provide reliable, economical performance in heater drains, gas and fuel oil control, feedwater control, steam/gas pressure reduction and many other power and process flow control operations. Suitable for controlling water, steam, gas and most other fluids, General Service Valves deliver a new standard of versatility, rugged dependability and cost effectiveness.
Procam hygienic
ProCam is an economical range of metering pumps, designed for use in many industrial or hygienic processes. The mechanically actuated
diaphragm pumps offer safe and reliable operation for hazardous liquids with a plunger pump head option for high pressure, low flow duties.
The pumps are suitable for single & multi-stream processes and auto-control using variable speed, electric stroke or a combination of both.
AI-187 Single Stage
The Dollinger AI-187 single stage air intake filter is designed to efficiently and economically remove dust, dirt and other airborne contaminants from the atmosphere in a single stage panel filter element protecting diesel and gas engines, blowers, axial compressors and small turbines and, at the same time, reducing inlet noise.
Dollinger manufactures 18 standard models, available with ranges from 3000 to 72,000 SCFM and bottom outlets ranging in size from 6" to 36" in diameter. The optional silencing feature provides sound attenuation up to 16 dB(A).
GD ENGINEERING
GD Engineering is a world leader in the manufacture of quick opening closures. Our GD Bandlock™ 2 is the original and benchmark design for global high pressure applications with over 20,000 units in operation worldwide.
GD Bandlock™ 2 Closures provide horizontal or vertical access to any pressure vessel in seconds. Compared with other quick-opening closures they can be operated safely at remarkable speed — any size of unit can be opened or closed in less than a minute, with no special tools required.
ESM SERIES
Demonstrating our commitment to continuous development of sustainable solutions, the ESM Series significantly lowers total cost of operation by consuming electrical power (kWh) in direct proportion to real-time demand.
Gearboxes
Water Testing
Gaskets
Pumps
Valves
Flow Meters
Metering Systems
Wellhead Systems
Compressors
Fluid Transfer
Pump Units
Gas Detection & Filters
Industrial Homogenizer
APV Industrial Heat Exchangers
Lightin
Plenty Mixers
Plenty Mirrlees Pumps
Plenty Filtration
Johnson Pumps
Plenty Strainers
M&J Valves
Copes Vulcan Valves
Bran & Luebbe Pumps
Dollinger Filtration
GD Engineering
Pneumatic Products
Products
Head office
1 Adeola Odeku Street
South Atlantic Petroleum Towers
Victoria Island | Lagos | Nigeria
Tel: +234 1904 9589, +234 (0) 909 026 0055
Lagos Branch Office
15, Ogundana Street | Off Allen Avenue |
Ikeja | Lagos | Nigeria
Stay Connected With Us!
GCA Energy Staff Email
Access Email Service
Port Harcourt Branch Office
15 Emeyal Street
GRA Phase I
Port Harcourt, Rivers State, Nigeria
Tel: +234 8093906260